TR-series, tie rod cylinders

Flexibility of motion

Rod seal uses spring loaded multiple lip vee rings, a supporting bronze bearing ring bushing and a double lip wiper
Piston seal combines two bi-directional sealing cast iron piston rings with two block vee seals with back-up rings
Hardened chrome plated piston rod resists scoring and corrosion, assuring maximum life
Steel tubing barrel, honed to a fine finish assures superior sealing, minimum friction and maximum seal life
Rod bushing and seals can be serviced by merely removing the retainer plate on most models.

pdf_download-84x85 Download Catalog page (pdf)

Chart (Metric)

Cylinder Capacity at 350 bar kN		Piston Diameter	Rod Diameter	Stroke	Clevis Mount Model Number	Foot Mount Model Number	Flange Mount Model Number	Cylinder Effective Area cm²
push	pull	mm	mm	mm	Clevis Mount Model Number	Foot Mount Model Number	Flange Mount Model Number	push	pull
39	22	38,1	25,4	50,8	TRCM-1502	TRFM-1502	TRFL-1502	11,4	6,3
39	22	38,1	25,4	101,6	TRCM-1504	TRFM-1504	TRFL-1504	11,4	6,3
39	22	38,1	25,4	152,4	TRCM-1506	TRFM-1506	TRFL-1506	11,4	6,3
39	22	38,1	25,4	254,0	TRCM-1510*	TRFM-1510	TRFL-1510	11,4	6,3
39	22	38,1	25,4	304,8	TRCM-1512*	TRFM-1512	TRFL-1512	11,4	6,3
70	37	50,8	35,0	50,8	TRCM-2002	TRFM-2002	TRFL-2002	20,3	10,7
70	37	50,8	35,0	101,6	TRCM-2004	TRFM-2004	TRFL-2004	20,3	10,7
70	37	50,8	35,0	152,4	TRCM-2006	TRFM-2006	TRFL-2006	20,3	10,7
70	37	50,8	35,0	254,0	TRCM-2010	TRFM-2010	TRFL-2010	20,3	10,7
70	37	50,8	35,0	304,8	TRCM-2012	TRFM-2012	TRFL-2012	20,3	10,7
109	56	63,5	44,4	50,8	TRCM-2502	TRFM-2502	TRFL-2502	31,7	16,1
109	56	63,5	44,4	101,6	TRCM-2504	TRFM-2504	TRFL-2504	31,7	16,1
109	56	63,5	44,4	152,4	TRCM-2506	TRFM-2506	TRFL-2506	31,7	16,1
109	56	63,5	44,4	254,0	TRCM-2510	TRFM-2510	TRFL-2510	31,7	16,1
109	56	63,5	44,4	304,8	TRCM-2512	TRFM-2512	TRFL-2512	31,7	16,1
185	115	82,5	50,8	50,8	TRCM-3202	TRFM-3202	TRFL-3202	53,5	33,3
185	115	82,5	50,8	101,6	TRCM-3204	TRFM-3204	TRFL-3204	53,5	33,3
185	115	82,5	50,8	152,4	TRCM-3206	TRFM-3206	TRFL-3206	53,5	33,3
185	115	82,5	50,8	254,0	TRCM-3210	TRFM-3210	TRFL-3210	53,5	33,3
185	115	82,5	50,8	304,8	TRCM-3212	TRFM-3212	TRFL-3212	53,5	33,3
280	170	101,6	63,5	50,8	TRCM-4002	TRFM-4002	TRFL-4002	81,1	49,4
280	170	101,6	63,5	101,6	TRCM-4004	TRFM-4004	TRFL-4004	81,1	49,4
280	170	101,6	63,5	152,4	TRCM-4006	TRFM-4006	TRFL-4006	81,1	49,4
280	170	101,6	63,5	254,0	TRCM-4010	TRFM-4010	TRFL-4010	81,1	49,4
280	170	101,6	63,5	304,8	TRCM-4012	TRFM-4012	TRFL-4012	81,1	49,4

Cushions are available for all cylinder models. Cushions slow down heavy loads prior to end of stroke, preventing damage to the cylinder of the machine. To add cushions to your Enerpac Tie Rod cylinder, simply add the letter “C” to the end of any model number. Note: the addition of cushions does not affect the outside dimensions of the cylinder.
* These models are only rated to 276 bar due to constraints on the mechanical properties of the rod.

Chart (Imperial)

Cylinder Capacity at 5000 psi pounds		Bore Diameter	Rod Diameter	Stroke	Clevis Mount Model Number	Foot Mount Model Number	Flange Mount Model Number	Cylinder Effective Area inch2
push	pull	inch	inch	inch	Clevis Mount Model Number	Foot Mount Model Number	Flange Mount Model Number	push	pull
8850	4900	1.50	1.00	2.0	TRCM-1502	TRFM-1502	TRFL-1502	1.77	0.98
8850	4900	1.50	1.00	4.0	TRCM-1504	TRFM-1504	TRFL-1504	1.77	0.98
8850	4900	1.50	1.00	6.0	TRCM-1506	TRFM-1506	TRFL-1506	1.77	0.98
8850	4900	1.50	1.00	10.0	TRCM-1510*	TRFM-1510	TRFL-1510	1.77	0.98
8850	4900	1.50	1.00	12.0	TRCM-1512*	TRFM-1512	TRFL-1512	1.77	0.98
15,700	8300	2.00	1.38	2.0	TRCM-2002	TRFM-2002	TRFL-2002	3.14	1.66
15,700	8300	2.00	1.38	4.0	TRCM-2004	TRFM-2004	TRFL-2004	3.14	1.66
15,700	8300	2.00	1.38	6.0	TRCM-2006	TRFM-2006	TRFL-2006	3.14	1.66
15,700	8300	2.00	1.38	10.0	TRCM-2010	TRFM-2010	TRFL-2010	3.14	1.66
15,700	8300	2.00	1.38	12.0	TRCM-2012	TRFM-2012	TRFL-2012	3.14	1.66
24,550	12,500	2.50	1.75	2.0	TRCM-2502	TRFM-2502	TRFL-2502	4.91	2.50
24,550	12,500	2.50	1.75	4.0	TRCM-2504	TRFM-2504	TRFL-2504	4.91	2.50
24,550	12,500	2.50	1.75	6.0	TRCM-2506	TRFM-2506	TRFL-2506	4.91	2.50
24,550	12,500	2.50	1.75	10.0	TRCM-2510	TRFM-2510	TRFL-2510	4.91	2.50
24,550	12,500	2.50	1.75	12.0	TRCM-2512	TRFM-2512	TRFL-2512	4.91	2.50
41,500	25,800	3.25	2.00	2.0	TRCM-3202	TRFM-3202	TRFL-3202	8.30	5.16
41,500	25,800	3.25	2.00	4.0	TRCM-3204	TRFM-3204	TRFL-3204	8.30	5.16
41,500	25,800	3.25	2.00	6.0	TRCM-3206	TRFM-3206	TRFL-3206	8.30	5.16
41,500	25,800	3.25	2.00	10.0	TRCM-3210	TRFM-3210	TRFL-3210	8.30	5.16
41,500	25,800	3.25	2.00	12.0	TRCM-3212	TRFM-3212	TRFL-3212	8.30	5.16
62,850	38,300	4.00	2.50	2.0	TRCM-4002	TRFM-4002	TRFL-4002	12.57	7.66
62,850	38,300	4.00	2.50	4.0	TRCM-4004	TRFM-4004	TRFL-4004	12.57	7.66
62,850	38,300	4.00	2.50	6.0	TRCM-4006	TRFM-4006	TRFL-4006	12.57	7.66
62,850	38,300	4.00	2.50	10.0	TRCM-4010	TRFM-4010	TRFL-4010	12.57	7.66
62,850	38,300	4.00	2.50	12.0	TRCM-4012	TRFM-4012	TRFL-4012	12.57	7.66
98,170	50,060	5.00	3.50	**	**	**	**	**	**
141,400	78,550	6.00	4.00	**	**	**	**	**	**
192,400	94,220	7.00	5.00	**	**	**	**	**	**
251,400	132,600	8.00	5.50	**	**	**	**	**

Cushions are available for all cylinder models. Cushions slow down heavy loads prior to end of stroke, preventing damage to the cylinder of the machine. To add cushions to your Enerpac Tie Rod cylinder, simply add the letter “C” to the end of any model number. Note: the addition of cushions does not affect the outside dimensions of the cylinder.
* These models are only rated to 4000 psi due to constraints on the mechanical properties of the rod.

Downloads

Applications

Printer-friendly version

HEAD OFFICE

HI-PRESS HYDRAULICS

Riverside Works
Forge Road
Whaley Bridge
High Peak
SK23 7HY

T: + 44 (0) 01663 735089
F: +44 (0) 1663 735090
sales@hi-press.co.uk

LOCATION MAP

BRANCH OFFICE

HI-PRESS HYDRAULICS

Unit 2
Hall House Ind Est
New Hutton
Kendal
Cumbria
LA8 0AH

T: +44 (0) 1539 734005
F: +44 (0) 1539 734006
cumbria@hi-press.co.uk

LOCATION MAP

NEWSLETTER SIGNUP :

Hydraulic Products

Enerpac

Enerpac products are distributed worldwide with the convenience of local service and support

ENERPAC
Cylinders
Heavy Lifting
System Components
Presses
Pullers
Specialty Tools
Bolting Tools
Workholding
Pumps & Valves
Railway Industry

Tangye

Tangye is renowned for its lifting equipment, Tangye lifting Jacks, lightweight jacks and vehicle lifting equipment, as well as Hydrapack pumps, Tangye cylinders, seal kits, Tangye manual and ancillary components.

Hi-Press Hydraulics supplies and supports a wide range of Tangye Hydraulic Equipment, from Hydrapack Multifluid Pumps to the aluminium Hydralite range.

Hydr’am

Hi-Press supplies and supports an extensive range of Hydr’am cutting equipment designed, developed and manufactured by Hydram.

Hydram cutting equipment is used for applications including nuclear dismantling, emergency services, destructive testing, etc.

Sitemap | © Copyright – Hi-Press Hydraulics | Enerpac Hydraulics, Tangye Hydraulic Products | Website Design by Thinlinecreative

T: +44 1663 735089

TR-series, tie rod cylinders

Catalogue page

Instruction Manual

HI-PRESS HYDRAULICS

HI-PRESS HYDRAULICS

Hydraulic Products

Enerpac

Tangye

Hydr’am