RACL-series, single-acting lock nut aluminium cylinders
Aluminium lock nut provides mechanical load holding for extended periods
Hardened steel stopring increasing cylinder life and resistance to side-loads of up to 5%
Hard-Coat finish on all surfaces resists damage and extends cylinder life
Handles standard on all models
Steel base plate and saddle for protection against load-induced damage
Integral stopring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
High strength return spring for rapid cylinder retraction
CR-400 coupler and dustcap included on all models
All cylinders meet ASME B-30.1 and ISO 10100 standards
Cylinder
Stroke
Model
Cylinder
Oil
Collapsed
Weight
ton (kN)
mm
cm2
cm3
mm
kg
20 50 RACL-202* 31,2 156 224 4,0 100 RACL-204* 312 274 4,6 150 RACL-206* 468 324 5,2 200 RACL-208* 624 374 5,8 250 RACL-2010* 780 424 6,4 30 50 RACL-302* 44,2 221 231 5,4 100 RACL-304* 442 281 6,1 150 RACL-306* 663 331 6,8 200 RACL-308* 884 381 7,5 250 RACL-3010* 1105 431 8,2 50 50 RACL-502 70,9 354 236 9,3 100 RACL-504 709 286 10,6 150 RACL-506 1063 336 11,9 200 RACL-508* 1417 386 13,2 250 RACL-5010* 1771 436 14,5 100 50 RACL-1002 143,1 716 296 21,9 100 RACL-1004 1431 346 24,2 150 RACL-1006 2147 396 26,5 200 RACL-1008* 2863 446 28,8 250 RACL-10010* 3578 496 31,1 150 50 RACL-1502 227,0 1135 323 32,2 100 RACL-1504 2270 373 36,2 150 RACL-1506 3405 423 40,2 200 RACL-1508* 4540 473 44,2 250 RACL-15010* 5675 525 48,2
* Made to order. Consult Enerpac for delivery
