RACH-series, hollow plunger aluminum cylinders
Hollow plunger design allows for both pull and push forces
Composite bearings increase cylinder life and side load resistance
Hard coat finish on all surfaces resists damage and extends cylinder life
Floating center tube increases seal life
Handles included on all models
Steel baseplate and saddle for protection against load-induced damage
Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
High-strength return spring for rapid cylinder retraction
Cylinder
Stroke
Model Number
Cylinder
Oil Capacity
Collapsed
Extended
Outside
Center Hole
Weight
ton (kN)
mm
cm2
cm3
mm
mm
mm
mm
kg
20 (229) 50 RACH-202 32,7 164 188 238 100 27 5,2 100 RACH-204* 327 251 351 6,1 150 RACH-206 491 315 465 7,1 200 RACH-208* 654 378 578 8,0 250 RACH-2010* 818 442 692 9,0 30 (358) 50 RACH-302 51,1 256 208 258 130 34 8,0 100 RACH-304* 511 267 367 9,5 150 RACH-306 766 333 483 11,2 200 RACH-308* 1022 395 595 12,9 250 RACH-3010* 1277 458 708 14,5 60 (596) 50 RACH-602* 84,7 423 251 301 180 54 16,2 100 RACH-604 847 315 415 19,5 150 RACH-606 1270 380 530 22,8 200 RACH-608* 1694 445 645 26,0 250 RACH-6010* 2117 510 760 29,6 100 (1157) 50 RACH-1002* 164,6 823 258 308 250 79 33,8 100 RACH-1004* 1646 325 425 39,8 150 RACH-1006 2487 391 541 46,2 200 RACH-1008* 3291 459 659 52,2 250 RACH-10010* 4114 527 777 58,8 150 (1588) 50 RACH-1502* 225,8 1129 280 330 275 79 48,9 100 RACH-1504* 2258 360 460 55,7 150 RACH-1506* 3387 430 580 63,0 200 RACH-1508* 4517 500 700 70,1 250 RACH-15010* 5646 570 820 77,2
* Made to order. Consult Enerpac for delivery
