ATM series
Enerpac Flange Alignment Tools
Rectifies twist and rotational misalignment without additional stress in pipe lines For most commonly used ANSI, API, BS and DIN flanges No slings, hooks, or lifting gear. Extremely safe, high precision ATM-1 supplied with three bushings for different bolt hole sizes. Can be used in reversed position ATM-3 fits on the following flanges:Ring Type Joints: flange wall thickness min 30 and max 100 mm Gasket Type Joints: flange wall thickness min 25 and max 115 mm ATM-5Fits Flange joints between 93-228mm [3.75 - 9 inch] apart and bolt hole size 31,5 mm [1.25 inch] or greater Includes 700bar hydraulics: cylinder RC-53, handpump P-142 and 1,8 meter long hose Stays stable in position under full load
Download Catalog page pdf
Email: sales@hi-press.co.uk
Max. Lifting
Type
Model
Bolt Hole Range
Flange Wall Thickness
Weight
ton (kN)mm
in
mm
in
kg
0,3 (3)Manual
ATM- 1
17 - 27,2
11/16 - 1 1/8
17 - 50
11/16 - 2
2,0
3 (27)Mechanical
ATM- 3
25 - 54
1 - 2 1/8
30 - 115
1 3/16 - 4 1/2
9,7
5 (45)Hydraulic
ATM-5
≥ 31,5
≥1 1/4
80-203
3 1/8 - 8
16,2
High
Pressure Hydraulics 
